Magner 150 - UV Sensor Error Codes; MG Sensor Error Codes

User’s Manual MAGNER150
- 42 -
- ERROR CODE AND DISPLAY MESSAGE FOR UV
ERROR
CODE
DISPLAY MESSAGE
CAUSE OF ERROR
Procedure for removing the
cause of error
E201 E-UH UV1 high level error
Suspect Note.
Check and restart counting
operation.
E202 E-UL UV1 low level error
E203 E-BH UV2 high level error
E204 E-BL UV2 low level error
E205 E-FH FL high level error
E206 E-FL FL low level error
- MG ERROR CODE
ERROR
CODE
DISPLAY MESSAGE
CAUSE OF ERROR
Procedure for removing the
cause of error
E211 E-M1(all currencies) MG Total ERROR
Suspect Note.
Check and restart counting
operation.
1. Check the note condition which is
dirty or wear out
2. Check the rear cover closed..
E212 E-M2(all currencies) MG Information Error 1
E213 E-M3(all currencies) MG Information Error 2
E214 E-M4(local only) MG Information Error 3
E215 E-M5(all currencies) MG Denomination ERROR
E216 E-M6(local only) MG Information Error 4
E217 E-M7(local only) MG Information Error 5