Magner 150 - How to Set the Serial Printer

User’s Manual MAGNER150
- 32 -
6-3. How to set the Serial Printer
SERIAL PRINTER MENU (1/2)
------------------------------
1.EXIT(PRESS RESTART KEY)
2.Find SERIAL PRINTER
>>3.How to print ----- *Manual
4.Printout Type --- *Receipt
5.Blank of tail --------- *5
------------------------------
NEXT HELP – CF KEY
Menu selection: MODE key
Value selection: PRINT, +10 or +1 key
When you press RESTART key after changing a setting value, Display shows
the message “Wait… Setting Data Saving…”
Serial RJP CF
--------------------
0
0
$
0
--------------------
B100 ---
+10 -> USER MENU
PRINT -> PRINT MENU
Press and hold down +10 key.
SERIAL PRINTER MENU (1/2)
------------------------------
>>1.EXIT(PRESS RESTART KEY)
2.Find SERIAL PRINTER
3.How to print ----- *Manual
4.Printout Type --- *Receipt
5.Blank of tail --------- *5
------------------------------
NEXT HELP – CF KEY
By pressing and holding down +10 Key in
any mode, you can enter special mode.
Display of special mode
Press PRINT key to enter PRINT MENU