Magner 150 - User Setting Menu Details

User’s Manual MAGNER150
- 36 -
7-2. Descriptions of Menu
USER SETTING MODE (1/3)
------------------------------
>>1.EXIT(PRESS RESTART KEY)
2.ID --- NONE
3.USER s ID PRINTING - *YES
4.REJECT POCK. ACTIVE - *YES
5.REJECT POCK. SIZE - *60
6.NUMBER OF PRINTOUT - *1
7.PRE-BATCH PCS. SETTING
8.SCREEN SAVER^^^- NONE
9.BUZZER VOLUME^^- Middle
------------------------------
NEXT PAGE – BATCH KEY
USER SETTING MODE (2/3)
------------------------------
>>10.PRINT WARNING - YES
11.STOP CONDITION - DISABLE
12.BAR CODE SEND TO COMPUTER
13. *USING : CENTER
14. *TYPE : 2 OF 5
15. *LENGTH : 18
16.CF KEY - EXCEPTION
17.SERIAL CF MODE- ON
18.BATCH FUNCTION- CLEAR
------------------------------
NEXT PAGE – BATCH KEY
USER SETTING MODE (3/3)
------------------------------
>>19.Face&Orientate - NORMAL
20.See the result - NOTMAL
21.Reject Number- SHOW
22.Serial Cutting - 200
23.Stacker Warning- NONE
------------------------------
NEXT PAGE – BATCH KEY
1. EXIT(PRESS RESTART KEY) Quit the menu.
2. ID Type the user name.
3. USER’s ID PRINTING The use of the Reject Pocket or not.
4. REJECT POCK. ACTIVE you can select whether use the Reject Pocket or not.
5. REJECT POCK. SIZE Set up the limit quantity of Reject Pocket. (30 ~ 90 Sheets)
6. NUMBER OF PRINTOUT Set up the number of printed sheets. (1~3 sheets)
7. PRE-BATCH PCS. SETTING You can choose any batch number.
8. SCREEN SAVER If user does not use the machine during regular time, the
machine enters screen save state. User set the regular time.
When press the key or take the notes on the HOPPER, return
back operation state.
9. BUZZER VOLUME Select buzzer volume.
10. PRINT WARNING Message of printing status is shown or not.
11. STOP CONDITION Stop Condition means when the note goes to reject pocket,
User can select the machine works continuously or not.
Disable: although a note is rejected, the machine works continuously.
CF error: if a note is rejected with CF error, the machine stops to work.
All error: if a note is rejected with any error, the machine stops to work
12. BAR CODE SEND TO COMPUTER User can select to print bar code to PC or Printer.
13. *USING : CENTER Select position of printed bar code
14. *TYPE : 2 OF 5 User can select bar code type
15. *LENGTH: 18 Length means bar code length and user can select this.
(1~26)