User’s Manual MAGNER150
- 37 -
16. CF KEY - EXCEPTION
NORMAL: Machine detects all counterfeits.
EXCEPTION: Machine detects counterfeits except special note or denomination.
17. SERIAL CF MODE- ON Activate or inactivate CF function in Serial Mode.
This function is only available with special hardware. If you want to use counterfeit
detection in Serial Number Print Mode, please contact manufacture.
18. BATCH FUNCTION- CLEAR
CLEAR – After batch count and remove note from stacker, value and count go to zero.
CONTINUE – After batch count, counting information is accumulated.
19. Face&Orientate – NORMAL
NORMAL: User can sort the notes with 4 directions, Face-Front, Face-Rear, Back-Front
and Back-Rear.
CONTINUE: User can sort the notes only Face-Front.
20. See the Result – NORMAL
NORMAL: If press PRINT Key shortly, counting result is printed to serial printer.
If press and hold down PRINT Key, counting result is printed to the display.
SCREEN: If press PRINT Key shortly, counting result is printed to the display.
21. Reject Number – SHOW
SHOW: Reject count number is shown on the display.
HIDE: If select this, reject count number becomes invisible.
22. Stacker Warning – NONE
User can select wait time for Stacker Warning. (10sec ~ 300sec)
* means the encourage value.
When you quit the all menu, press the RESTART•STOP key.
If you want to go to next page immediately, press BATCH Key.
To Next Page
Loading...
