Magner 150 - Page 38

User’s Manual MAGNER150
- 38 -
USER SETTING MODE (1/2)
------------------------------
>>1.EXIT(PRESS RESTART KEY)
2.ID --- NONE
3.USER NAME PRINTING - *YRS
4.REJECT POCK. ACTIVE - *YES
5.REJECT POCK. SIZE - *60
6.NUMBER OF PRINTOUT - *1
7.PRE-BATCH PCS. SETTING
------------------------------
NEXT PAGE – BATCH KEY
PRE-BATCH PCS. ADJUSTING
>>EXIT<< DEFAULT SAVE
------------------------------
The Unit of Calc. : 10
BATCH 1 --- 100
BATCH 2 --- 50
BATCH 3 --- 25
BATCH 4 --- 20
BATCH 5 --- 10
BATCH 6 --- 0
------------------------------
----------------------
|Please Wait.......
|
|Setting Data Saving..|
----------------------
1. Press MODE key to move the “>>” make to
select “7.PRE-BATCH PCS.SETTING”
Then press PRINT key to enter the “7.PRE-
BATCH PCS.SETTING”
2. The LCD Display will display as below.
EXIT : Exit the menu.
DEFAULT : Return the standard value.
SAVE : Saves the setting value.
3. If you want to change the BATCH value,
press the MODE key and select the BATCH
number.
4. Change the value using the ▲/+10 or ▼/+1
key.
5. After finishing, move the “>>” make to
select “SAVE” then
press the PRINT key.
6. Display shows the message as left.
7. Press the RESTART•STOP key.
PRE-BATCH PCS. setting
WRITING USER
’
s ID
------------------------------
!
”
# $ % &
’
( ) * + , -
. / 0 1 2 3 4 5 6 7 8 9 : ;
< = > ? @ A B C D E F G H I
J K L M N O P Q R S T U V W
X Y Z
[
＼
]
^ _ ＇ a b c d e
f g h I j k l m n o p q r s
t u v w x y z BackSpace
------------------------------
USER
’
s ID:
How to input ID
1. Press MODE key to move the “>>” make
to select “2. ID-“ and press PRINT key to
enter.
2. Display shows following display.
Move to left: CF
Move to right: CURRENCY
Move to up: +10
Move to down: +1
Delete a character: Select “BackSpace”
and press PRINT key.
3. If want to type a selected character, press
PRINT key.
4. When finish typing ID, press RESTART•
STOP key.