Magner 150 - Page 28

User’s Manual MAGNER150
- 28 -
Print the Error Report
When the counted notes are rejected, user can receive the error report by the LCD Display or
printing receipt.
- Error report on the LCD Display.
When the notes are rejected, do not remove the note from reject pocket, press and hold down
MODE key.
The display shows as below.
Reject Reasons
------------------------------
Count | Detail Reasons
------------------------------
1 | Value Error (E101)
2
| Jam Error
3 | E-M1
4 | E-C1
5 | E-UH
6
| Double Error
7 | Skew Error
------------------------------
HELP – CF KEY
Type of Error
| Number
------------------------------
Count Error
| 3
Function Error
| 0
Value Error
| 1
UV, MG Error
| 3
No CIS Result
| 0
No UV,MG Result
| 0
|
|
| 7
------------------------------
HELP – CF KEY
Count means the number of rejected notes.
User can move next or previous page pressing
+10 key or +1 key.
When pressing MODE key, Display shows the
list of type of error.
MODE
When pressing MODE key again, return to
previous display.
If want to exit, press RESTART•STOP key.
Count Error: This error is caused by counting states. For example, double notes inserted, the
note is skewed, etc.
Function Error: This error is caused in SP, Single and Direction Mode.
Value Error: When CIS sensor data is wrong, this error is caused.
UV, MG Error: When the machine detects the counterfeit, this error is caused.
No CIS Result: When the machine does not get the CIS sensor data, this error is caused.
No UV, MG result: When the machine does not get the UV and MG data, this error is caused.