Flex 4EX2 / 6EX2 MRX CE Instruction Manual
November 2018
Page 15 of 44
3.1.4 6EX2 Internal Illustration
* The programming port is only used for updating the transmitter firmware. It is not used with the IR
Programmer. For more information, contact Magnetek field service.
1. RF Transceiver Board 5. Infrared Sensors
2. Encoder Board 6. I-Chip Slot
3. Status LED Indicator 7. Function Dipswitch
4. LED 1/2/3/4 Indicators 8. Programming Port*
To Next Page
Loading...
