Magnetek Flex 4EX2 - Other Dipswitch Settings

Flex 4EX2 / 6EX2 MRX CE Instruction Manual
November 2018
Page 31 of 44
4.2.4 Other Dipswitch Settings
S2 Dip Position 8 Function
Dip set to “0” or down Normal
Dip set to “1” or up Display system firmware version
S2 Dip Position 9 Function
Dip set to “0” or down Normal
Dip set to “1” or up System testing (receiver MAIN relays disabled)
S2 Dip Position 10 Function
Dip set to “0” or down
Receiver-to-transmitter remote pairing
(pressing the Pairing button required)
Dip set to “1” or up
Receiver-to-transmitter remote pairing
(pressing the Pairing button not required)
S2 DIP 6~10
ON DIP
ON D IP ON DIP