Magnetek Flex 4EX2 - Receiver Status Indications; Receiver Power Indications; Receiver COM Indications

Flex 4EX2 / 6EX2 MRX CE Instruction Manual
November 2018
Page 42 of 44
6.4.2 Receiver Status Indications
6.4.3 Receiver Power Indications
6.4.4 Receiver COM Indications
Type Display Type (Green & Red) Indication
1 Fast green blinks Decoding in process
2 Slow green blinks Decoding on standby
3 2 red blinks
Receiver MAIN relays jammed
or defective
4 3 red blinks Decoding processors defective
5 4 red blinks Receiving RF defective
6 Fast red blinks
Incorrect transmitter serial
number
7 Solid red Receiver low voltage
8 No light displayed Decoding processors defective
Type Display Type (Red) Indication
1 On Power to receiver
2 Off No power to receiver
Type Display Type (Red) Indication
1 On Power to relay board
2 Off No power to relay board