Flex 4EX2 / 6EX2 MRX CE Instruction Manual
November 2018
Page 28 of 44
4.2.2.9 Receiver Channel Scanning Function
Receiver channel scanning function is applicable only when a preset channel is
assigned to the system (see Section 4.1.2 on page 18, part B).
(1)
→ “00” manufacturer preset (channel X)*
(2)
→ “01” scans 2 channels (channel X and channel X+1)
(3)
→ “10” scans 3 channels (channel X… channel X+2)
(4)
→ “11” scans 4 channels (channel X… channel X+3)**
* Channel X → channel set on the Channel dipswitch.
** Contact ARC representative if your application requires
scanning more than 4 channels.
Example: If the first 6 dipswitch positions are set to channel 01 (000001), when set to
2-channel scanning (type 2 above) the receiver will scan only channel 01 and 02.
1 2 3 4 5 6 7 8
ON DIP
S3 DIP 7~8
1 2 3 4 5 6 7 8
ON DIP
S3 DIP 7~8
1 2 3 4 5 6 7 8
ON DIP
S3 DIP 7~8
1 2 3 4 5 6 7 8
ON DIP
S3 DIP 7~8
To Next Page
Loading...
