Magnetek XLTX - Page 37

Engineered XLTX Transmitter Instruction Manual
December 2016
Page 37 of 49
CAN Configuration Page
This page allows the user to modify the CAN bus network communication settings.
Source Address
This is the address that the XLTX will use as the source address when transmitting messages on
the CAN bus network.
Protocol
This pull down menu allows the user to modify the communication protocol for the CAN bus
network. The user can select from the following options:
 J1939
 CAN Open
 Parker ICP
 High Country Tek DN
 OEM Controls