© Copyright Mahindra & Mahindra Ltd. 012016
11-3
If turning the key is difficult, jiggle the steering wheel from side
to side and try again. The key can be removed only in the
LOCK
position. When the key is removed, the steering column lock is
activated and the steering wheel cannot be turned.
Never return the key to the
LOCK
position or try to remove the
key, when the vehicle is in motion. Removing the key allows the
steering wheel to lock. You will lose control of the vehicle and
may cause a serious accident. Remove the key only when the
vehicle is parked.
11.3 Starting the Engine
Make sure all vehicle occupants are properly seated in their seats
and have buckled their safety belts. For more information on seat,
headrest positioning, safety belts and their proper usage, refer to
the “Seat Belts” section in this manual.
Before cranking the engine
• Make sure the gear shift lever is in neutral
• Make sure the parking brake is engaged. Turn the key to IGN
position but do not turn the key to start
• Few warning lamps briefly illuminate. See “Warning Lamps in
the Instrument Cluster” section for more information
1. Shift the gear shift lever to neutral position.
2. Apply parking brake.
3. Turn the ignition ON.
4. Do not press the accelerator.
5. Turn the key momentarily to the START position to crank the
6. Once the engine starts, release the key; it will return to the IGN
position
Do not continue cranking after the engine has started.
This will lead to damage of the starter and other engine
components.
7. If the engine fails to start, attempt to restart after about 10
seconds
8. If the engine fails to start even after repeated attempts as per
the procedure given above, contact the nearest Authorized
Mahindra Dealer
To prevent damage to the starter, wait 10 seconds before
attempting to restart the engine.
STARTING AND DRIVING THE VEHICLE
To Next Page
Loading...
Need help?
General
