8-54
© Copyright Mahindra & Mahindra Ltd.012016
RESUME Button
With the help of RESUME, you can opt for the previous set cruising
speed of the vehicle. This is best explained with the following
example:
1. Assume, you have activated the cruise mode and set the
vehicle speed at 50 kmph
2. Due to an obstacle or a sharp turn, you have deactivated the
cruise mode either by pressing the brake pedal or by switching
OFF the cruise control
3. Vehicle comes out of the cruise mode
4. When the road condition is suitable to switch over back to
cruise control mode, press RESUME button once. The system
activates the cruise control mode to the previous cruising
speed of 50 kmph
5. To resume the previous cruise set speed, the vehicle speed
should be above 20 kmph
Override Function
This function enables the user to ramp up the cruising speed to
overtake the vehicle in front.
The cruising speed can be increased by using the accelerator
pedal. The user has to complete this action within 30 seconds, to
maintain the cruise mode. If the user exceeds the 30 second limit,
cruise mode will be deactivated.
8.40 Radio Frequency ID (RFID) Tag
Your vehicle is fitted with a RFID tag as per CMVR regulations on
front windshield.
RFID tag may be used for Electronic Toll Collection (ETC).
Do not peel or remove the RFID.
FEATURES AND CONTROL
To Next Page
Loading...
Need help?
General
