© Copyright Mahindra & Mahindra Ltd. 012016
8-53
in current driving cycle, reactivate the Cruise to the last active
cruise speed by pressing the RESUME button.
Cruise control may not hold the set speed when you are going
uphill or downhill, and the vehicle may come out of cruise
control. This is indicated by the cruise lamp going OFF in the
instrument cluster.
Cruise Control Deactivation
You can cancel cruise control in any of the following ways;
• Pull the CRUISE button in the steering wheel
• Press the brake pedal
• Press the clutch pedal
SET+ Button
The SET + button is used to activate cruise control and also to
increase the cruise set speed.
To increase the speed in very small amounts, press the SET +
button. Each time you press it, the cruise set speed increases by
about 1 kmph.
When you wish to continuously increase the cruising speed, press
and hold the SET + button and release when the desired speed is
reached.
SET- Button
To decrease the speed in small amounts, press the SET- button.
Each time you press it, the cruise set speed decreases by about 1
kmph.
When you wish to continuously decrease the cruising speed, press
and hold the SET- button. When the desired speed is reached,
release the button.
Cruise control activation is advised above a vehicle speed of 40
kmph and is recommended to be used for 3
r
d
gear & above.
However Cruise Control is designed to operate above a vehicle
speed of 20 kmph and for all gears except 1
s
t
& reverse gear.
The cruise lamp in the instrument cluster functions only if
cruise control is active.
The cruise control is a convenience system designed to assist
the driver during vehicle operation. The driver must at all times
remain alert of road/traffic conditions and is responsible for
the vehicle brake operation / steering control. Never activate
cruise control in traffic or when driven in adverse road
conditions (heavy rains, windy, slippery, etc.)
FEATURES AND CONTROL
To Next Page
Loading...
Need help?
General
