14-10
© Copyright Mahindra & Mahindra Ltd.012016
14.5.5 Checking/Topping Engine Coolant Level
• Park the vehicle on a flat-horizontal surface. Keep the parking
brake fully engaged. Shut-off the engine
• Wait till the engine cools down and hence coolant temperature
comes down to normal room temperature
• The coolant level should be between ‘MIN’ and ‘MAX’ marking
provided on the coolant recovery tank
• In case the coolant level is below the ‘MIN’ marking, the coolant
should be topped-up
• The coolant should be filled till the level rises above the ‘MIN’ but
remain below the ‘MAX’ marking on the coolant recovery tank
• However if the Coolant Recovery Tank is found to be near empty,
it is recommended that the system be checked at an Authorized
Mahindra Dealer
Never open the pressure cap when the engine is hot. Hot
coolant may splash resulting in serious personal injury or
severe burns by the erupting liquid.
Top up only with recommended Ready-To-Use (RTU) coolants
for ensuring performance, anti-freezing and corrosion
protection. Do not add water directly. Mixing with other brands
of coolant is not recommended and should be avoided.
Draining or changing of engine coolant should always be done
by an Authorized Mahindra Dealer.
MAINTENANCE
To Next Page
Loading...
Need help?
General
