© Copyright Mahindra & Mahindra Ltd. 012016
5-5
When returning the rear-reclined seat back to its upright
position, make sure you support seat back while operating the
lever.
Seat Folding
The second-row seat can be flipped forward to provide more cargo
space.
1. Lower the second-row seat head restraint to the lowest
position
2. Recline and fold down the seat back (refer previous section for
reclining the seat back)
3. Pull the strap behind the seat to unlock and lift the seat base
to vertical position
4. To keep the seat in vertical folded position, hook the seat to the
front seat head restraint rod with the holding strap kept in the
small pocket in the seat bottom. Tighten the holding strap to
securely hold the seat to the head restraint
Unhook the strap, when the seat needs to be unfolded and put the
strap back in the pocket. Swing the whole seat-back down to lock
the latch. Ensure the seat is locked.
A seat not secured with a holding strap is dangerous. Ensure
that the stowed seats are secured with the holding straps. The
holding strap and hook is kept in the pocket under the seat.
Return the seat back to its position in one continuous motion to
securely lock the seat and in turn avoiding the seat flipping
forward suddenly leading to injuries. If this happens, release the
seat lock by pulling the lever and repeat the procedure. Be
cautious when placing your hands around the seat anchors.
SEATS AND SEAT BELTS
To Next Page
Loading...
Need help?
General
