7-12
© Copyright Mahindra & Mahindra Ltd.012016
• The vehicle will not be protected until the key has been taken out
of the ignition
If the engine check lamp flashes or remains continuously
illuminated after the ignition being switched ON, there is a
system malfunction. Contact an Authorized Mahindra Dealer
immediately.
Inserting the correct coded key in the ignition and switching the
ignition ON, automatically deactivates the system. This enables the
engine to start.
In the event of the vehicle not starting with the correct key,
switch off the ignition and remove for a minimum of 1 minute
before attrmpting to start the vehicle again.
Do not modify, remove or disassemble the engine immobilizer
system. Any unauthorized changes or modifications can affect
proper operation of the system and will void your warranty.
Do not attempt to install after market ‘push-button’ start
systems. These systems may compromise your vehicle’s
security system.
LOCKS AND KEYS
To Next Page
Loading...
Need help?
General
