To Next Page

To Previous Page

Operation Manual easyScreen

8508935 Rev. 4

04/04/2019

Start Print Process After Screening from the Test Done Screen

Figure 83

Printing of test results on the label printer can be performed at the

Test Done screen by selecting the Test List button in the

bottom control bar. The full list of screening tests performed for

this patient will appear in reverse chronological order (Figure 83).

For your convenience, the most recently performed right and

left ear screening in the current session will be pre-selected

for printing. This is reflected by a small green checkmark

appearing on a printer icon at the right side of the row. You

can deselect by touching the symbol. You can select other

tests in the list for printing according to your preferences.

If only one right and one left ear screening is selected for printing

in the list, then both ears’ results will be printed out on a single

label. When more than 2 tests are selected for an ear, then each

screening will be printed out on a separate label.

NOTE: The print icons will not appear on easyScreen under certain conditions. If

label printing or wireless communication is not enabled on the device via the

HearSIM PC application or if a label printer has not been paired to the easyScreen,

the icons will not appear.

5.13.3.3 Understanding the Print-Out

The label print-out displays the following information (Figure 84)

Figure 84

Maico easyScreen User Manual

Questions and Answers: