56
Note: Battery is very important, for any abnormal phenomenon happens to the robot, you are
strongly suggested to change new battery.
And many cases show that GPS should be enabled for Makeblock App.
IV. Why iPad 2 and below doesn't support Bluetooth from Makeblock
The Bluetooth module on our product supports BLE protocol, while for Apple products, only the
products published after the year 2011 support BLE protocol which can work with the Bluetooth
on our product.
Since the iPad 2 doesn't support BLE protocol, it cannot work with our APPs which need connect
with Bluetooth.
The APPs of our product work with iPad 3 and above and the iOS should be iOS 9.0 and above.
V. The Bluetooth connection to the Starter is unstable?
For the issue that the Bluetooth connection is unstable between Robot and Makeblock App, it may
be caused by the power issue, or the Bluetooth module is not connected well to Port 5 on Orion
board, or you may change the battery for the Starter have a try since it is easy to lead disconnect
issue on Bluetooth when it lacks power.
To Next Page
Loading...
