75
Why my Ultimate 2.0 starts to run every time I turn it on
Problem:
Once I turn on the robot, it begins to run at fast speed and it doesn’t listen to my command.
Reason:
The reason should be that we changed its form/mode to self-balancing robot in Makeblock App and the powered it
off, then when we reassemble it to other form like robotic arm tank, it will run once we power it on.
Solution:
To fix the issue, power on the main board, then connect it with Makeblock App and change the
mode to correct one, then it will stop running and listen to your control.
To Next Page
Loading...
