Malaguti PHANTOM MAX 250 - 1.2 Identification Data

6
i
EN
Fig. 2.2
Fig. 1
A
C
Fig. 2.1
Fig. 2
B
125 cc250 cc
B
MARCHIO DI FABBRICA: MALAGUTI S.P.A.
CATEGORIA DEL VEICOLO: (*)
1
- ---------------------
2
- ---------------------
3
- ---------------------
4
- ----------------------
5
- ----------------------
6
- -----------------------
7
- -----------------------
8
- -----------------------
9
- ------------------------
10
- ---------------------
11
- ----------------------
12
- ----------------------
1.2 IDENTIFICATION DATA
• To access the vehicle identification number, open the centre
compartment with the ignition key and remove the cover (A - fig. 1).
• The vehicle’s VIN label is applied to the front of the vehicle, on the right
hand side, under the top casing (C - fig. 2.2).
• Engine identification data are visible on the left engine cover (B-Fig. 2).
• Anti-tampering plate (for 125cc models only) (Fig. 2.1) An anti-
tampering control plate with all motorbike identification data required
by the Directive 97/24/CE Chap. 7 is fit inside the helmet compartment.
In case of replacement of the helmet compartment, make sure the plate
is refitted.
Altering the identification data is punished by law.
• When ordering spare parts, always quote the vehicle identification
data.