TECHNICAL DATA
395
AE6 Stage 2 2st edition
1 After accidental bolting of cracked conrods and
conrod bearing covers that do not belong to
gether, the parts must not be used again
Conrod bearing
1 Conrod bearing shell thickness: 2.480 - 2.495
mm
Spread: max. 2.0 mm
If traces of wear are present (traces of scoring,
running layer damaged), replace both bearing
shells
Caution: note installation position (rod shell has
red paint marking on the side)
1 Bearing inside diameter in installed
state: Ø 96.047 - 96.099 mm
To Next Page
Loading...
