GENERAL
8
647534EN
00 - 20/01/2017
GENERAL
00.1 GENERAL INSTRUCTIONS AND SAFETY NOTICE
00.1.1 PREAMBLE
00.1.2 MAINTENANCE POSITION
This chapter deals with the general instructions and safety notice during inspection and maintenance
work.
Other instructions and warnings are indicated in each chapter concerned.
In order to reduce accident risks, make sure to:
Follow the instructions in the truck operating and maintenance manual.
⇒ This manual should be found in all trucks.
Please follow all safety instructions.
Use the appropriate tools for any work to be performed.
Use original Manitou spare parts.
Any non-compliance increases the risk of accidents occurring which may lead to causing grievous bodily
harm and even death.
An e cient, dependable and pro table combination will be formed if the operator follows the safety
manual correctly and the machine is serviced properly.
Before any intervention
:
1 - Place the machine on a at surface and chock the wheels.
2 - Turn o the engine and remove the ignition key.
3 - Let the machine cool down.
4 - Take all the pressure out of the circuits concerned.
manualequipospesados@gmail.com
To Next Page
Loading...
Need help?
General
