,|
e
PREVENTIVE MAINTENANCE CHECK LiST
DALLY INSPECTION
The following " Preventive Maintenance Check List" is designed
as a general guide, to provide a systematic visual and physical
inspection of the machine, before normal operation.
Preventive Maintenance checks and services required by Section
,5.2.1.2, "Frequent Inspections," of the ANSI B30.5 Code, ore
included. The lesser important machine components should be
visually checked while proceeding through the check list.
DAILY VISUAL CHECKS
ITEM TO BE CHECKED
NO.
1. Broken or cracked glass.
2. Damaged or missing sheet metal, Guards, Gear or Chain Case Covers.
3. Drive chains & sprockets for cracked or broken pieces.
4. Oil or coolant leaking below rotating bed or carbody.
5. Roller path, House Rollers, Hook rollers for chips or cracks.
Machine S.N
6.
7.
8.
9.
10.
I1.
L__I
2.
13.
Boom hoist, Whip line & Hoist wire rope - Pendants - Load blocks - Sheaves.
Fuel tank(s) - Fuel gauges - Hoses & Connections.
Limit devices - Boom/Mast stops - Drum pawls.
Control valves - Levers & linkage - Instrument panel(s).
Fire extinguisher available - In working order.
Work Shift.
Since this is a general guide, blanks ~are provided for the user
to insert additional items that may require checking on some
job applications.
Any discrepancies should be recorded in the remarks section.
DAILY PREVENTIVE MAINTENANCE CHECK LIST
NO.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25. I
--26.
ITEM TO BE CHECKED PROCEDURE
Radiator Coolant
*Controlled Converter Fluid
Hydraulic System(sl Level
Check Level, odd when necessary.
Check Reservoir, add oil when necessary.
Gear Case Lube Check Level, odd when necessary.
"Cuno" Oil Filter(s) Turn Handle TWICE DAILY.
Engine Oil
Transmission and/or Chain Case or Reservoir
Rotating Bed Sump
Converter Input and/or Output Housing(s)
Air
compressor
Check Level, Add oil when necessary.
REMARKS
-- XTE I
I
72---I
INITIAL EACH ITEM AS CHECKED
' DATE
INITIAL EACH ITEM AS CHECKED
DATE
'bVlCON Machines Onl,
ITEM DATE CORRECTED INITIALED
Rev. 2-7-72 Folio 742
395143
To Next Page
Loading...
