Manitowoc Engineering Co.
2. MANUAL WASHING;
a. The same general procedures and pre-
cautions should be employed in man-
ual cleaning of the windows. Avoid
the use of cleaning implements that
m~y gouge the windows.
CAUTION :
NEVER SCRAPE LEXAN WINDOWS WITH RAZOR
BLADES OR OTHER SHARP OBJECTS.
3. REMOVAL OF STAINS:
NOTE :
This procedure is for limited use only.
Do Not use this procedure in place of nor-
real washing procedures.
a. In some cases, removal of highly
resistant stains or deposits such as
paints, marking pens, etc., from
Lexan Windows will require the fol-
lowing precedure :
l) Apply "butyl cellosolve" (Available
from paint supply houses) to the
stained area.
2) Allow i0 to 30 minutes to soak in
and soften the deposit.
3) Wash off with an alcohol solvent and
finally rinse with water. Use clean
rags or non-abrasive shop towels for
all stain removal procedures.
NOTE:
For installation instructions refer to the
shop manual.
.4
!
FOUO
919-2 12-13-77
395143
To Next Page
Loading...
