Marantz NR1602 - Input Source Assignment; Input Assign Menu Examples and Operations; HDMI and Digital Input Assignment

98
System Setup
Setting items Setting details
Add New Feature
Display new features that
can be downloaded to this
unit and perform an update.
Upgrade : Execute the upgrade process.
When updating starts, the power indicator becomes red and the menu
screen is shut down. The amount of update time which has elapsed is
displayed.
•If the upgrade is not successful, an error message identical to those in
“Firmware Update” will appear on the display. Check the settings and
network environment, then update again.
Upgrade Status : Display a list of the additional functions provided by the
upgrade.
See the marantz website for details about updates.
When the procedure is complete, “Registered” is displayed in this
menu and updates can be carried out. If the procedure has not been
carried out, “Not Registered” is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main
unit’s p and MENU for at least 3 seconds.
Notes concerning use of “Firmware Update” and “Add New Feature”
•In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection (vpage14).
•Do not turn off the power until updating or upgrading is completed.
•Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/
upgrading procedure to be completed.
•Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/
upgrading is completed.
•Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc. set
for this unit.
•If the update or upgrade fails, press and hold the ON/STANDBY on the main unit for more than 5
seconds, or remove and re-insert the power cord. “Update retry” appears on the display and update
restarts from the point at which update failed. If the error continues despite this, check the network
environment.
•Information regarding the “Firmware Update” function and “Add New Feature” will be announced on
the marantz web site each time related plans are defined.
•When usable new firmware is released with “Firmware Update” or “Add New Feature”, a notification
message is displayed on the menu screen. When you do not want to be notified, set “Notification” –
“Update” (vpage95) and “Upgrade” (vpage95) to “OFF”.
Language Default settings are underlined.
Set the language for display on the menu screen.
Setting details
English / Deutsch / Français
“Language” can also be set by the following procedure. However, the menu screen is not displayed.
1. Press and hold the main unit’s MENU and ENTER for at least 3 seconds.
“V.Format:<PAL>” appears on the display.
2. Press the main unit’s STATUS and set “Lang:<ENGLISH >”.
3. Press the main unit’s o p and set the language.
4. Press the main unit’s ENTER to complete the setting.
Basic version
Advanced version
Information
Advanced version
BD