71
Convenient functions
nRemembering set details (Backup)
u
MENU
Set the unit in the state you want remembering, and press
and hold u and MENU for at least 3 seconds.
“MEMORY SAVING” is shown in the display, and the setting details
are remembered.
NOTE
•The volume is not remembered.
•If remembered details are overwritten, the previously remembered
contents are deleted.
nRecalling remembered details (Recovery)
u
DISPLAY
Press and hold u and DISPLAY together for at least 3
seconds.
“MEMORY LOAD” is shown in the display, and the remembered
details are recalled.
NOTE
•If there is no remembered data, “NO BACKUP” is shown in the
display, and no remembered details are recalled.
•As the volume cannot be recalled, it returns to the factory setting
volume.
Panel lock function
To prevent accidental operation of this unit, you can disable operation
of the buttons on the front panel.
ON/STANDBY
ONE TOUCH PLAYDISPLAY
RETURN BAND VOLUME
nDisabling all key button operations
Press ON/STANDBY while you press and hold ONE
TOUCH PLAY
and BAND with the unit in standby mode.
“Panel Lock:ON” appears on the display and all button operations
except ON/STANDBY are disabled.
nDisabling all button operations except VOLUME
Press ON/STANDBY while you press and hold ONE
TOUCH PLAY
and DISPLAY with the unit in standby
mode.
“Panel Lock:ON” appears on the display and all button operations
except ON/STANDBY and VOLUME are disabled.
nCanceling the Panel lock function
Press ON/STANDBY while you press and hold ONE
TOUCH PLAY
and RETURN with the unit in standby
mode.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit
using the remote control unit.
Dual backup memory function
The unit stores settings information in nonvolatile memory even when the main power supply is turned off. Using the Dual Backup Memory
function, you can write settings information to another memory area to back up saved settings for recovery anytime as needed.
To Next Page
Loading...
