Marantz PM8005 - TECHNICAL SPECIFICATIONS; Performance and Electrical Specifications

• RMS Power output (for U / N / F model)
(20 Hz – 20 kHz simultaneous drive of both channels) :
70 W x 2 (8 Ω/ohms load)
100 W x 2 (4 Ω/ohms load)
• RMS Power output (for K model)
(20 Hz – 20 kHz simultaneous drive of both channels) :
65 W x 2 (8 Ω/ohms load)
95 W x 2 (4 Ω/ohms load)
• Total harmonic distortion
(20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) :
0.02 %
• Output band width (8 Ω/ohms load, 0.06 %) :
5 Hz – 60 kHz
• Frequency response (CD, 1 W, 8 Ω/ohms load) :
5 Hz − 100 kHz ± 3 dB
• Dumping factor (8 Ω/ohms load, 40 Hz – 20 kHz) :
100
• Input sensitivity/Input impedance
PHONO (MM) :
2 mV / 47 kΩ/kohms
CD, TUNER, NETWORK, AUX, RECORDER :
200 mV / 20 kΩ/kohms
POWER AMP DIRECT IN :
1.6 V / 15 kΩ/kohms
• Output voltage/Output impedance
PRE OUT :
1.6 V / 600 Ω/ohms
• Maximum allowable PHONO input level (1 kHz)
MM :
100 mV
• RIAA deviation (20 Hz – 20 kHz) :
± 0.5 dB
• S/N (IHF-A, 8 Ω/ohms load)
PHONO (MM) :
87 dB (5 mV input, 1 W output)
CD, TUNER, NETWORK, AUX, RECORDER :
106 dB (2 V input, Rated output
POWER AMP DIRECT IN :
125 dB (Rated output)
• Tone control
Bass (50 Hz) :
±10 dB
Mid (900 Hz) :
±6 dB
Treble (15 kHz) :
±10 dB
Power requirement (for U model) :
AC 120 V, 60 Hz
Power requirement (for N model) :
AC 230 V, 50/60 Hz
Power requirement (for K model) :
AC 220 V, 50 Hz
Power requirement (for F model) :
AC 100 V, 50/60 Hz
Power consumption (EN60065 / UL60065) :
220 W
Power consumption in standby mode :
0.2 W
Unit : in. (mm)
Weight : 12.0 kg
329 379
225
59 45
17
111
128
440
340
56
50
50
17
33
TECHNICAL SPECIFICATIONS
DIMENSION
9