Example 2, descending order:
You wish to specify grade limits for three grades, 1-3:
grade 1 = 300-400 g
grade 2 = 200-300 g
grade 3 = 100-200 g
You set the grade limits in the following way:
= 400 g
= 300 g
= 200 g
= 100 g
to
= 0.
To record a weight manually
1
Watch the Steady indicator.
2 When the indicator lights up, press the PRINT key to
record.
3 The message
(Recording in progress) appears on the
Config Display as long as the recording is in progress.
4 If you try to record the same weight again (double
recording), a flashing
appears on the display.
Press the
MENU key to remove the message.
This message (
- Invalid recording attempt) also appears, if you try to
record an unstable weight.
To record a weight automatically (reverse and positive
grading)
1
Enable this option by turning on the
application switch
(see page 34).
2 The scale will automatically record the weight of items as
they are removed from the platform (reverse grading) or
placed on the platform (positive grading).
Normal grading:
Using this method you place an item on the platform and the grade will
appear on the Config Display.
To use normal grading
1
Use the arrow keys and to scroll to the grading
memory you wish to use.
The grading memory is active as soon as its name appears on
the Config Display.
24 • Basic Operation M1100, U2 & C2-3.3
To Next Page
Loading...
