3. Operation
Turn the speed control knob to the right
from the center position – locomotive
travels to the right.
Turn the speed control knob to the left
from the center position – locomotive
travels to the left.
If the locomotive does the opposite of the
above, then the red and brown feeder
wires need to be reversed.
The further the speed control knob is tur-
ned to the right or left from the center
position, the faster the locomotive will go.
Tip: It does not matter if the locomotive is
placed on the track with its front facing to
the right or left. It will always travel in the
same direction as the direction in which
the speed control knob is turned.
25
To Next Page
Loading...
