Chapter 5 INSTRUCTIONS FOR USE 47
5.3.1.1 QR-code and serial number
Initial condition:
Handle switched off.
Access mode
:
Pressure of only one of the two buttons
( blue).
Description:
It shows QR code and serial number of the handle.
To exit:
The handle exits this menu automatically after 10 sec. or
you can immediately exit one click ( blue) of only
one of the two buttons.
Figure 5-1.
QR code and serial number.
5.3.1.2 Current firmware version
Initial condition:
Handle switched off
.
Access mode
:
Pressure of only one of the two buttons ( blue).
After the QR code is displayed, repeat the sequence
( blue).
Description:
It shows the current firmware version of the handle:
M= Main Board, D= Display, R= Radio.
To exit:
The handle exits this menu automatically after 10
seconds or you can exit immediately with one
click ( blue) of only one of the two buttons.
Figure 5-2. Current firmware version
.
M 2.0.2
D 1.3.0
To Next Page
Loading...
