Mars m2 multi User Manual

26
6. SEtUP
6.2. ProFilE setting description
The setting is performed when switching on the device. Briey press the yellow button on the control unit, GO-ON sign appears (for 2 seconds).
Do not hold the button, depress it only briey!!! During the time the GO-ON sign is displayed, immediately after it comes on, depress the
yellow button briey once again. The GO-ON sign appears again. After the yellow button is depressed again (GO-ON sign displayed), the last
preset PROFILE can be seen on the display (Stu, Int, Pro, CPi, TAn). Do not press the button to conrm the prole, but wait for the OFFSEt sign
to appear, after two seconds the INFO sign appears and after another two seconds the SETUP comes on - conrm by depressing the button
shortly.
SCALE is shown as rst, do not conrm. Wait until ProFilE is displayed, than conrm it by shortly pressing the button.
By conrming access to the ProFilE menu, the individual proles begin to show in two-second intervals.
Stu – Student,
Int – Intermediate,
Pro – Professional,
CPi – Canopy Piloting,
TAn – Tandem,
For prole parameters, see chapter 3.4.
Conrm the selected prole to be displayed by pressing the button.
After switching on the m
2
multi, the selected prole will be displayed on the display.

Mars m2 multi Specifications

General

Brand	Mars
Model	m2 multi
Category	Measuring Instruments
Language	English