Need help?Do you have a question about the Mars m2 multi and is the answer not in the manual?
General| Brand | Mars |
|---|---|
| Model | m2 multi |
| Category | Measuring Instruments |
| Language | English |
Overview of the m² multi Automatic Activation Device and its purpose.
Highlights the main benefits and features of the m² multi device.
Explains how the m² multi device functions based on pressure readings.
Details the physical build and components of the m² multi device.
Describes the control unit, cutter mechanism, and their functions.
Defines profiles and lists available options: STUDENT, INTERMEDIATE, etc.
Specifies activation parameters for the STUDENT profile.
Specifies activation parameters for the INTERMEDIATE profile.
Specifies activation parameters for the PROFESSIONAL profile.
Specifies activation parameters for the CANOPY PILOTING profile.
Specifies activation parameters for the TANDEM profile.
Visual representation of activation zones for different profiles.
Detailed parameters for STUDENT and INTERMEDIATE profiles.
Detailed parameters for PROFESSIONAL and CANOPY PILOTING profiles.
Detailed parameters for the TANDEM profile.
Explains the ADJUST function for modifying activation altitude.
Explains modes like BASIC, OFFSET HI, OFFSET LO and their use cases.
Describes the BASIC mode for same-elevation take-off and landing.
Details the OFFSET HI mode for higher landing locations.
Further explanation of the OFFSET HI mode's functionality.
Details the OFFSET LO mode for lower landing locations.
Illustrates the operation of BASIC and OFFSET HI modes with examples.
Step-by-step guide for setting the OFFSET HI mode.
Illustrates the operation of OFFSET LO mode with an example.
Step-by-step guide for setting the OFFSET LO mode.
Basic operation of the single yellow control button on the unit.
Procedure for turning the m² multi device on and off.
Instructions on how to change the active profile.
Step-by-step guide for changing the device profile.
How to access and interpret device information via the INFO menu.
Explains the meaning of individual letters displayed in the INFO menu.
Details the Gravity Index and its importance for Canopy Piloting.
Lists and explains error messages and their corresponding solutions.
Introduction to device settings: SCALE, Profile, Adjust.
Procedure for setting measurement units (meters/feet).
Step-by-step guide for setting measurement units.
Procedure for selecting and setting the device profile.
Step-by-step guide for changing the device profile.
Procedure for adjusting activation altitude (A1-A9).
Example of adjusting altitude with setting A2 for PRO profile.
Conditions for use in pressurized aircraft and water jumps.
Key instructions for pilots regarding device operation.
Essential operational principles and safety precautions for use.
Step-by-step guide for installing the m² multi device.
Proper methods for stowing control and cutter cables.
Ensuring correct cable placement and pouch use for safety.
Detailed variations for securing the reserve parachute closing loop.
Procedure for replacing the cutter, including user/rigger options.
Instructions for replacing the air filter after water contact.
Information on battery life and annual inspection requirements.
Key physical and operational specifications of the device.
Details the expected service life of the device and cutter.
Information on the manufacturer's warranty terms.
Information for airport security personnel regarding the device.
To Next Page