diam. 8 mm
diam.
3,8 mm
diam.
10 mm
9 mm
55 mm
8 mm
6
2. m
2
multi description
2.3. Control unit
The body of the control unit is made of stainless steel and is connected to the processing unit by a exible cable. The unit has a display for the
various icons and a control button.
2.4. Cutter
The cutter is made of stainless steel and cuts the reserve parachute closing loop, if necessary.
Its shape allows it to be rmly xed between the reserve parachute container aps and it prevents the cutter body from turning around its
longitudinal axis. It is highly scratch resistant. It is connected to the main unit via a exible cable and a connector. The connector is completely
inserted into the processing unit and is secured with a locking screw to prevent accidental removal.
Only press the control button with the pad of
your finger!
Control buttonDisplay
To Next Page
Loading...
Need help?
General