34
8. Installation
The cables must not be stowed in the pouch determined for the device body, nor shall they be stowed (partially) under the device body. There
is a risk of damaging the cables. Stow the cutter and the control unit in accordance with the Manual provided by the container manufacturer
so that in both cases there is at least minimum space for the cables. Space for cables reduces the changce of damage to the device after
packing and during normal use.
Before a complete installation, read the Manual provided by the container manufacturer carefully.
To secure proper function of the m
2
multi, the closing loop must go through the cutter!
Elastic pouch with Processing Unit
Control Unit
To Next Page
Loading...
Need help?
General