Mars m2 multi User Manual

39
10.1. Basic technical data
Total weight ........................................................................................... approx. 220g
Length, width, height of the processing unit ............................ approx. 85mm x 45mm x 23mm
Length, width, height of the control unit ................................... approx. 63mm x 18mm x 5mm
Thickness, length of the cutting unit ........................................... thickness 8mm x length 55mm
Control unit cable length .................................................................
approx. 660mm
Cutting unit cable length ................................................................. approx. 500mm
Working temperature (inside the device)................................... approx. from -20 °C / -4 °F to +60 °C / +140 °F
Storage temperature - recommended ........................................ approx. from +5 °C / +41 °F to +25 °C / +77 °F
Water resistance ................................................................................... 24 hours up to 2m / 6.5ft deep
Adjusting landing location altitude ..............................................
approx. +/- 999m / +/- 2,999ft
Operation time ..................................................................................... approx. 14 hours from activation
Total service life .................................................................................... approx. 15 years + 6 months or 5 000 ight hours or 15 000 jumps (20 minutes per jump)
Range of use under / above sea level .......................................... approx. -500m / -1,640ft to +8 000m / +26,200ft
10.2. Device service life
The total service life of the
m
2
multi device is 15 years + 6 months from the date of manufacture, or a total of about 5 000 ight hours, which is
about 15 000 jumps (maximum 20 minutes per jump start-landing). After the nal assembly and complete operation test of each
m
2
multi device,
the device remains fully functional, including actual deduction of the battery capacity. If during a battery check, a new
m
2
multi device displays the
current capacity 99 % (INFO, letter “b”, Section 5.4.), the number is correct and DOES NOT IN ANY WAY AFFECT THE GIVEN TOTAL SERVICE LIFE of the
m
2
multi device. For a quick and easy check, the device can show the current capacity in %. As long as the capacity is higher than 0 %, the device
will always provide reliable function. In case the capacity drops to zero, the device displays a ashing letter “b” (battery) when switched on during
calibration. However, the device will still be functional. Never use the
m
2
multi device with 0% battery capacity!
10.3. Cutter service life
The cutter service life is 16 years from the date of manufacture. The cutter is marked with the batch code and the last two digits of the year of ma
-
nufacture. Never use an expired cutter.
10.4. Warranty
The manufacturer grants a warranty of 24 months from the date of purchase on all parts used in the
m
2
multi device and its proper operation within
the specied limits. The warranty does not cover damage resulting from normal use of the device, its improper installation or non-standard and
rough handling. The manufacturer reserves the right to decide whether to repair or replace the device.
10. Technical data

Mars m2 multi Specifications

General

Brand	Mars
Model	m2 multi
Category	Measuring Instruments
Language	English