EasyManuals Logo

Martin DESIGNER User Manual

Martin DESIGNER
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
4 53D0419
53D0419 5
PRODUCT FEATURES AND CODE APPROVAL
Off/Pilot/On Knob
Optional
Remote
Receiver
Figure 1 - Designer Fireplace
Hi/Lo Knob
PRODUCT SPECIFICATIONS
This appliance has been certied for use with either
natural or propane gas. See appropriate data plates.
This appliance is not for use with solid fuels.
The appliance is approved for bedroom or bedsitting room
installations.
The appliance must be installed in accordance with local
codes if any. If none exist use the current installation
code. ANSI Z223.1/NFPA 54 in the USA, CAN/CGA
B149 in Canada.
This appliance is mobile home approved.
This appliance is approved for bathroom installation.
Blower Control
On/Off/RS Switch
The appliance must be properly connected to a vent-
ing system.
The appliance is not approved for closet or
recessed installations.
The efciency rating of this appliance is a product thermal
efciency rating determined under continuous operating con-
ditions and was determined independently of any installed
system.
Thermal Efciency = up to 80%
Control Panel

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Martin DESIGNER and is the answer not in the manual?

Martin DESIGNER Specifications

General IconGeneral
BrandMartin
ModelDESIGNER
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals