Service and maintenance 21
Fixture readouts
DMX input signal
The DMX LIVE menu lets you view the DMX values received on each channel in the mode – STD or EXT –
it is currently set to. If the fixture does not behave as expected, reading the DMX values can help you
troubleshoot the problem.
Fixture status
The MAC Aura gives fixture status readouts in the INFO menu:
• Current software/firmware version information.
• Temperature readouts from the main PCB as well as the Beam LED and Aura LED PCBs. In each case,
you can view the current temperature and the maximum temperature reached since the readout was last
reset. The maximum temperatures can be reset individually. The
MAX temperature counters are not
resettable.
• Power on hours. You can view the number of hours since the resettable counter was last reset or the total
number of hours since manufacture. You can also reset the resettable counter to zero.
• The manufacturer’s serial number and the fixture’s RDM ID number.
Display messages
If an error occurs, the MAC Aura gives fixture status readouts in the display. See “Display messages” on
page 31.
Lubrication
In general, the MAC Aura does not require lubrication. However, depending on use conditions, the moving
parts in the pan and tilt mechanisms may eventually require reapplication of lubricant. Excessive noise
during pan/tilt movement is a sign that lubrication may be required. This operation can be carried out by a
Martin service partner if necessary.
To Next Page
Loading...
Need help?
General
