SILENT 12
41
I
GB
5.2 Termointerruttore motore a circuito chiuso
Caratteristiche: 120° C contatto n.o.
Metodo di controllo
- Immergere il termostato in un contenitore di liquido
antigelo o di olio.
- Riscaldare il liquido e misurarne la temperatura. Se il
tester mostra valori di continuità alla temperatura
di107-113°C, il termointerruttore è in buono stato.
(fig.16)
RIMEDIO: sostituire il termostato
5.2 Closed-circuit engine thermal switch
Characteristics: 120° C N.O. contact.
Test method
- Immerse the thermostat in a container of antifreeze
fluid or oil.
- Heat the fluid and measure the temperature. If the
tester shows continuity values at a temperature of
107-113°C, the thermal switch is in good condition.
(Fig.16)
REMEDY: replace the thermostat.
5 SENSORY