SILENT 12
63
I
GB
8.7 Motorino avviamento
Caratteristiche:12V 0,8 KW
Metodo di controllo:
-Scollegare il cavo di cablaggio bianco
sez.2.5mm
2
. (con faston femmina)
-Utilizzare una batteria 12V collegando il (+) della
batteria con il morsetto a vite ed il (-) a massa
(carcassa del motorino)(fig.39).
-Verificare che il motorino giri facendo un ponte
fra il morsetto a vite (+ motorino avviamento) ed
il faston adiacente (fig.39 rif.1).
Rimedio: sostituire il motorino di avviamento.
8.7 Starter motor
Characteristics:12V 0.8 KW
Test method:
-Disconnect the 2.5mm
2
white cable. (with female
Faston)
-Use a 12V battery connecting the (+) of the battery
to the screw terminal and the (-) to the ground
(starter motor casing)(Fig.39).
-Check that the motor turns by placing a jumper
between the screw terminal (+ starter motor) and
the adjacent Faston (Fig.39 Ref.1).
Remedy: Replace the starter motor.
8 ELECTRICAL SYSTEM