EasyManua.ls Logo

Massimo MSU 800 - Page 25

Massimo MSU 800
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-4
UNLOCK” position(see pages 4-12). At
this moment, rear differential on the rear gear
case is locked and the rear differential can
not work. Please keep this indicator light
coming on when drive on the muddy off-road.
NOTE:
When the rear differential is set up at ‘DIFF.
LOCK’ position and the ignition switch is
turned on, the light ‘DIFF.LOCK’ will be on
(red) all the time.
When the road is in good condition for using
rear differential only, please set up the drive
mode as ‘2WD’ first, then turn the handle to
the right side, then press UNLOCK” button
to unlock the rear differential and the
light will turn off.
Neutral Indicator Light “N”
This indicator light comes on when the drive
select lever is in the “N” position.
Reverse Indicator Light “R”
This indicator light comes on when the drive
select lever is in the “R” reverse position.
NOTE:
If the indicator light flashes under any other
circumstances or the speedometer does not
show the speed while riding, have a dealer
check the speed sensor circuit.
On-Command Four-Wheel-Drive Indicator
”/
The On-Command four-wheel-drive indicator
comes on when the On-Command four-

Table of Contents

Other manuals for Massimo MSU 800

Related product manuals