MLI Ultra 12/2750, 12/5500, 24/5500 – User and Installation Manual
17. TECHNICAL DATA
Technical specifications
No load voltage, fully charged
Charge/discharge parameters
Charge voltage,
Bulk/absorption phase
1)
Charge voltage, Float phase
Recommended charge current
Maximum continuous discharge
current
Discharge cut-off voltage
4)
Max. 500A. Minimum DC breaking capacity (IR): 15kA
Rated capacity and cycle life
Upright (recommended) or on the long side
Operating temperature
2)
/
3)
–25 to 50ºC / –13 to 122ºF
Nominal operating temp.
3)
–25 to 50ºC / –13 to 122ºF
< 5% per month @ 20ºC / 68ºF
IP65 (electronics cabinet)