Matica MC-L2 - Troubleshooting; Error Messages and Solutions Guide

ⓒ2021Matica Technologies Group. All rights reserved
34
3. After selecting the pass mode, press ‘OK’ to go back to the previous step.
4. Press ‘MENU’ to go into the standby mode.
5. If any changes have been made, you will be prompted to save the changes.
Press ‘OK’ to save the new settings or ‘MENU’ if you do not want to save them.
UP 500 / LO 500
W30 / READY
2019.07.29(V0XX)