136 Matrix SATATYA Devices Manual
Play back to back recordings feature for Asynchronous Playback
This feature allows the users to view the recordings of the same camera one after the other. To access this feature
user can follow the steps below:
• Search the recordings by applying the required filters in the Asynchronous Playback.
• Click on the recording you want to play on the live view window.
• When the recording gets finished, three controls will be displayed to the user on the screen i.e., Previous,
Replay and Next button as shown in the screen below.
The controls will be seen to the user based on the scenarios explained below.
Scenarios:
1. If the recordings of the same camera is available, then the next button will be enabled for the user
along with the timer count down display at the center of the playback window to play the next video as
shown above. If the user does not click on any of the buttons within 5 seconds then next recording will
be played automatically.
2. If the previous recording of the same camera is not available then the previous button will remain
disabled.
3. If the next recording of the same camera is not available, then the next button will remain disabled.
To Next Page
Loading...
Need help?
General
