40 Matrix SATATYA Devices Manual
Selecting an Installation Location
The SATATYA device should be installed at a secured location in an environment providing normal temperature and
humidity levels.
The operating temperature should be between 0 deg C to 50 deg C (32F to 122F).
The humidity level should be between 10% to 95% RH Non condensing.
Place the SATATYA device on a level surface. Do not use it on a wobbling or inclined stand.
Stay away from electrical or communication devices: The SATATYA devices must be located at a minimum distance
of 2 m (6 feet) from any high voltage equipment or wiring (> 230 Volts) and from electrical equipment susceptible of
generating electrical interference.
Do not Install near any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat.
Excessive heat can shorten the life of electronics.
Install the device away from direct sunlight.
To Next Page
Loading...
Need help?
General
