Matrix SATATYA NVR0801X System Manual

Matrix SATATYA Devices Manual 33
CHAPTER 3 Pre-Installation Information
Installation Precautions
It is very important for the installer to read and understand all the instructions in this manual before starting the
installation process. For each stage in the installation and commissioning procedure of device, a brief description is
given of its purpose, complete with detail drawings, flow diagrams and/or other graphics, wherever possible, to
make the instructions easy to follow. Before installing the SATATYA device, you must first check the Product and
ensure that the following criteria have been met. Failure to do so may not only result in damage to the equipment,
but may also cause problems when commissioning the system and may adversely affect its performance.
Product Inspection
The SATATYA devices are simple to install and commission if the procedures as described in the Installation and
Commissioning sections of this manual, are followed.
Follow all installation instructions described in this manual. These instructions must be understood and
followed to avoid damage to the system and associated equipment.
Before Installation verify contents of the package shipped to you with the contents listed below. If any of the items is
missing or damaged, contact your Dealer/Reseller.
Unpack the system. Make sure that your package contains all the
below items along with the SATATYA device.
NVRX Series Variants Package Contents
Contents
NVR0801X/
NVR1601X
NVR1602X/
NVR3202X
NVR3204X/
NVR6404X
NVR6408X
Adapter 12VDC
Yes (5A) Yes (5A) SMPS SMPS
SATA Power Cable
12NANA
SATA Data Cable
1248
1 Cable mains MC-4 3 Pin
NA NA Yes Yes
HDD fitting screws M6/32
PAN PH
481632
USB Mouse
Yes Yes Yes Yes
Side Clamps for Rack
Mounting
No Yes Yes Yes
Alarm Out Terminal Plug
Yes Yes Yes Yes

Matrix SATATYA NVR0801X Specifications

General

Brand	Matrix
Model	SATATYA NVR0801X
Category	DVR
Language	English