Matrix SATATYA NVR0801X System Manual

92 Matrix SATATYA Devices Manual
The SATATYA NVRX is assigned a Static IP for LAN2 Port. The administrator can assign a Static IP address to the
NVRX based on the availability. And specify the Subnet Mask and the Gateway based on the network settings at
the site.
LAN 2 option will not be available for the devices having single LAN port.
IP Assignment Mode for the LAN 2 option is Static by default and can not be changed.
Storage
You can configure the volume for the storage in NVRX. It supports different RAID levels according to the way of
storing the data in multiple physical disks interfaced to the NVRX. To know more about RAID creation and Total
Logical Volume in different NVRX series variants, See “RAID Concept” on page 318.
The below page will appear on the screen as ‘No Disk Found’ if the Hard Disks are not connected with the device.
To know more about installation of the HDDs, See “Installing Hard Disks” on page 65.

Matrix SATATYA NVR0801X Specifications

General

Brand	Matrix
Model	SATATYA NVR0801X
Category	DVR
Language	English