Matthews VIAcode T50 - Technical Specifications

37
T50/T100 PTM – User Guide – Version 2 Issue 1
Appendix – Technical Specifications
Technical Specifications
Table 5 - Technical specifications
Specification Comment
Dimensions Refer to “Dimensions” on page 9
Electrical
Matthews power supply pack used:
Single phase 110 – 240 VAC, 50 – 60 Hz, 0.8 A
Direct connection:
24 VDC ± 0,5 V, 90 W, filtered DC
External Interface Ethernet – Proprietary
Ink type
Scantrue II: pigmented oil based ink for porous surfaces. 500 ml or 125 ml ink
cartridge.
IP classification IP 40
Maximum mark size per print head
(Can be increased, as required, by
stacking print heads)
T50: 1.97ʺ (50 mm)
T100: 3.94ʺ (100 mm)
Maximum print speed
T50/T100: 276 ft./min. (84 m/min)
The value provided is an approximate value. It is dependent upon the contents of
the message being printed, and the density setting used.
Message and object storage Virtual – Unlimited
Minimum font height T50/T100: 5/16ʺ (2 mm)
Print direction Bi-directional
Print head orientation Horizontal only
Print/throw distance ≤ 0.2ʺ (5 mm)
Resolution
Vertical: Physical – 192, addressable – 64 dpi
Horzontal: up to 640 dpi