Safety Requirements – General Considerations
T50/T100 PTM – User Guide – Version 2 Issue 1
4
• In the event of either a spillage or leak, print heads must be shutdown immediately and
isolated from any sources of heat, spark, or flames. Refer to ink MSDS for cautions,
warnings, and appropriate clean up procedures.
• Good housekeeping practices and proper containment of ink, ink residuals, and incidental
line leakage is critical. The customer is responsible for ensuring proper care and
procedures are followed to ensure that print heads and ancillary equipment are kept clean
and well maintained.
• In accordance with applicable federal and state environmental laws, the customer is
responsible for properly disposing of the waste generated by the printing equipment. Refer
to the relevant ink and cleaner MSDS sheets for cautions, warnings, and proper handling
procedures.
To Next Page
Loading...
