12
QM00991-1
Introduction
Warnings, Cautions, and Notices (continued)
►Take care not to fatigue your eyes.
• Watching the display continuously for a long time makes your eyes tired.
• Rest the eyes periodically.
►Take care of the lens.
• It may cause breakage, malfunction, or image failure.
• Attach the lens cover to prevent the lens surface being scratched when the
projector is not used.
• Be careful not to scratch the lens with hard objects.
• Use commercially available lens tissue to clean the lens (used to clean
cameras, eyeglasses, etc.).
►Do not directly touch the lens surface with hands.
• Do not touch the lens to prevent fog or dirt of the lens that cause deterioration
of display quality.
►Do not give the remote control any physical impact.
• A physical impact could cause damage or malfunction of the remote control.
• Take care not to drop the remote control.
• Do not place the projector or heavy objects on the remote control.
►Do not get the remote control wet.
• It may cause a malfunction or battery leakage.
• Do not place the product in a place where it may get wet.
► The remote control uses infrared light to send signals to the projector
(Class 1 LED), so be sure to use the remote control in an area free from
obstacles that could block the remote control’s signal to the projector.
• If the signal transmission of the remote control is blocked, the remote control
may not operate.
NOTICE
(continued on next page)
To Next Page
Loading...
